Deck Sanding, Oiling & Outdoor Timber
Grey, splintered decks come back to life with a proper sand and a penetrating oil or decking stain. We also build and replace deck boards, handrails and outdoor steps.

The short answer
A grey, weathered timber deck usually needs cleaning, sanding and fresh oil instead of replacing. Melbourne guides published in 2026 put a clean and recoat at about $15 to $45 per square metre and a full restoration at about $45 to $80. Exposed decks generally need re-oiling every 12 to 18 months.
What is included
- Deck sanding & restoration
- Oiling, staining & UV protection
- New deck board installation
- Merbau, spotted gum, blackbutt & composite
- Handrails, steps & pergola timber
- Annual maintenance coats
Questions we hear
How often should a deck be re-oiled?
Every 12 to 18 months for a fully exposed deck, longer for covered areas. We offer a maintenance visit so it never gets to the point of needing a full sand.
Oil or stain for a deck?
Oil soaks in, highlights the grain and is easy to refresh. Stain gives a more even colour and hides weathered timber better. We bring samples so you can see both on your boards.
Should I repair or replace my deck?
If the frame is sound and most boards are solid, restoring is usually the better value. Rot in the joists or bearers, or widespread soft boards, points to rebuilding part or all of it.
How long does deck oil take to dry?
It depends on the product and the weather. Keep heavy furniture off for several days, and check the label for the recoat and traffic times.
Can you restore a grey deck?
Yes. Grey is weathering on the surface of the timber. Cleaning and sanding remove it and the colour comes back once the deck is oiled.
How much does deck restoration cost in Melbourne?
Decks are usually priced per square metre, based on how much work the timber needs. Handrails, steps and loose boards are extra.
| Work | Typical published price |
|---|---|
| Clean and recoat | $15 to $45 per m² |
| Sand and reseal | $30 to $45 per m² |
| Full restoration: strip, sand, repair and oil | $45 to $80 per m² |
Ranges from Melbourne deck companies' 2026 price guides. They are a guide only and are not our prices.
How often should you oil a deck?
Sun and rain set the schedule. Published advice varies, so treat these as a starting point and check the deck each year.
| Exposure | Re-oil about every |
|---|---|
| Full sun, no cover | 9 to 12 months |
| Typical open deck | 12 to 18 months |
| Under a roof | 18 to 24 months |
A simple test to see if your deck needs oil
Sprinkle some water on the boards. If it beads, the old coat is still working and new oil will not soak in. If it soaks in within a minute or two, the deck is due.
Deck oil or deck stain?
Oil soaks into the timber and shows the grain, and it is easy to refresh. Stain has more pigment, so it gives a more even colour and hides weathered patches better. Paint and film coatings can peel and are the hardest to fix later, which makes them a poor choice for deck boards.
How a deck is restored
A full job usually takes one to three days, plus any drying time for weather. Sanding removes a thin layer of timber each time, so a regular oil is better for the deck than waiting for it to go grey.
- Inspect boards, fixings and the frame underneath
- Wash the deck and let it dry for two to three days
- Replace damaged boards and punch or replace fixings
- Sand the surface, taking off only what is needed
- Apply oil or stain in dry weather, with no rain due for 24 hours
Merbau, spotted gum, blackbutt and treated pine
Merbau is a popular decking timber in Melbourne. New merbau bleeds tannin, which can stain nearby paving, and it is commonly left four to eight weeks before the first oil. Spotted gum and blackbutt are hard Australian species that weather to silver if left uncoated. Composite boards do not need oil at all.
Recent deck work

