05

Timber Flooring Supply Melbourne

We supply solid Australian hardwoods, European oak engineered boards and hybrid planks direct to homeowners, builders and other installers. Buy supply-only or bundle it with installation for one point of contact.

Timber Flooring Supply MelbournePhoto by Alex Jones on Unsplash

The short answer

We supply solid Australian hardwood, European oak engineered boards and hybrid planks across Melbourne, with or without installation. Melbourne listings in 2026 show solid Australian hardwood from about $55 to $130 per square metre, and European oak from about $130 to $200, before installation.

What is included

  • Australian species: spotted gum, blackbutt, jarrah, Tas oak
  • European oak engineered boards
  • Hybrid SPC & WPC planks
  • Parquetry & herringbone blocks
  • Underlay, adhesives, trims & finishing products
  • Trade pricing for builders & installers

Questions we hear

Can I buy flooring without installation?

Yes. Supply-only orders are welcome and we can arrange delivery across Melbourne.

Do you have samples?

Yes. We bring sample boards to your site so you can see the colour in your own light.

How much does timber flooring cost per square metre?

Melbourne listings in 2026 show solid Australian hardwood from about $55 to $130 per square metre and European oak from about $130 to $200, before installation. Grade, board size and finish all change the price.

Is spotted gum good for flooring?

Yes. It is a hard Australian timber with a distinctive wavy grain, and it suits busy homes. It can also be used outdoors for decking.

Which is better, blackbutt or Tasmanian oak?

Blackbutt is the harder of the two and suits busy areas. Tasmanian oak is paler and takes stain well. Both look good under a clear water-based finish.

Choosing a timber species

Colour is usually the deciding factor, so see a sample in your own light before ordering.

TimberColourGood to know
Spotted gumPale to dark brown, wavy grainHard and popular for floors and decks
BlackbuttPale straw to light brownHarder than Tasmanian oak, and suits a clear finish
Tasmanian oakPale straw to light pinkTakes stain well
JarrahDeep redA classic, rich look
European oakWarm honey tonesUsually engineered, with wide boards available

How much flooring do you need to order?

Measure each room and add a waste allowance for cuts. Allow about 5% extra for a straight lay and 8% to 12% for herringbone or chevron. It also pays to keep a few spare boards for future repairs.

Feature, standard and select grades

Grade describes how much natural character the boards show. Select is the cleanest, with few knots or marks. Standard has some, and feature has the most gum veins and knots. Grade changes the look and the price.

Solid, engineered and hybrid

Solid boards are milled from one piece of timber, commonly 19 mm thick, and can be sanded many times. Engineered boards have a real timber top on a stable base. Hybrid planks are rigid and waterproof, and they cannot be sanded.

Supply for builders and installers

We supply builders and other flooring installers at trade pricing, along with underlay, adhesives, trims and finishing products. Tell us the species, grade, quantity and delivery date and we will come back with a price.

Other services

CallRequest a quote